Wandboard

Old Browser

You are using an outdated browser. Please update your browser.

news

Wandboard SATA Boot (THIS VOIDS YOUR WARRANTY)

Not scared of using a solder iron and voiding your warranty?

Remove 2 resistors and place one resistor back at the bottom side of the Wandboard Quad Module.

Top row : 8th resistor counting from the JTAG header REMOVE (R145)

Bottom row : 6th resistor counting from the same side. REMOVE (R174). 5th resistor (R173) ADD one of resistors you removed earlier.

If you want to add a SSD or 2.5 inch harddisk you will also need to make a power cable that takes the 5V and GND signals from the JP4 expansion header.